Complete Fix Solution

Showing posts with label to. Show all posts

Showing posts with label to. Show all posts

Thursday, November 20, 2014

How to charge your HTC EVO

The HTC EVO tells you with a flashing LED light amber when the battery capacity rechargeable lithium- ion 1500 mAh is less than 14 percent of the load and need recharging. You can also charge it at any time before the warning appears, if you notice that the energy level in the status bar battery icon no longer displays a green, indicating that the load is almost complete. Charge your EVO is not difficult. The phone comes with a single USB charger with an AC adapter for this purpose.How to charge your HTC EVO

Insert the USB socket charger AC adapter USB charging port or accessories in the bottom of your HTC EVO .
Connect the other end of the charger into a wall outlet . Verify that the amber LED light has stopped flashing and the battery icon has a lightning bolt on it , which indicates that your phone is charging .
Wait until the LED remains green, the ray in the icon disappears and the icon is completely green .
Unplug the charger from the wall socket and your phone.

Wednesday, November 19, 2014

HTC One X How to Change Boot Animation

-Terms, Android Status: Rooted
-Backup original file, before doing so

Figure Boot Animation is animation that appears when the device / boot devices to load the operating system when you first turned on and functioning Boot Animation is also to enhance the process of loading the operating system. Of course we do not like it if when loading only see a black display on the Lcd is not ..? Mobile Vendors usually give this Boot Animation different and certainly will not be the same as other vendors. And more unique we also can make your own or just replace the file Animationnya with the work of others who dupublikasikan. Well, at this time I will explain how to change the Boot Animation on Android phones.

Please differentiate for Boot Logo and Boot Animation.

Boot Logo (My Take on the Xperia Ray, ICS):
Boot Animation (MOD):

Gear change Boot Animation on Android phones

Application to do the copy-paste files, can use Root Exploler
Boot Animation files, in my example uses the file Boot Animation
Software Image editor if you want to create an image of themselves Animation

Explanation Regarding the contents of File bootanimation.zip (download above)

Part1 part0 folder and is a place to store the image files into animation during the boot process, inside this folder contains files formatted image. Png
This file contains desc.text file defining how existing image files in the folder and Part1 part0 during boot.
the contents of the file desc.txt as follows:
240 400 30 <- not data-blogger-escaped-br = "" data-blogger-escaped-image. = "" data-blogger-escaped-lcd = "" data-blogger-escaped-resolution = "" data -blogger-escaped-but = ""> p 1 0 p part0
p 0 0 part1 p
Once the file is downloaded, rename the file to bootanimation.zip
Copy bootanimation.zip file to SDCARD
Copy bootanimation.zip file from SDcard using Exploler Root to system/customize/resource
Reboot and see what happens.
You can download other boot in XDA XDA

Tuesday, November 18, 2014

HTC One X How to Block Private Numbers

I hate if take caller when using private number. Private number is calling to hide the Caller ID number.
Do you feel the same with me?? If so, I will try to share tips on how to unblock private number using the application. Droidmate Call Filter or commonly referred to as Call Filter where we can block incoming calls Private Number. The effect is any incoming call automatically Private Number then the call will be End Call us before the phone rang.

You can download hereI assume you have downloaded and installed the application Droidmate Call Filter / Call this filter. The steps to block private number on android is an open call filter:

Call Blacklist Filters ► ► ► Block Private Number Option ► End Call + SMS Block ► Save

Monday, November 17, 2014

How to Install G7106ZNUANB3 Android 4 3 Jelly Bean Firmware

Install Android 4.3 Jelly Bean Official Firmware on Galaxy Grand 2 Duos G7106 through Odin:

Download Android 4.3 ZNUANB3 Firmware for Galaxy Grand 2 Duos G7106 from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy Grand 2 Duos G7106 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot Lcd appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Grand 2 Duos G7106 to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin Lcd, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: G7106XXDLJ5_G7106ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Sunday, November 16, 2014

How To Samsung Galaxy S5830 Hard Reset Solutions

Follow the following diagrams to hard reset Samsung Galaxy S5830 :

How To-Samsung Galaxy S5830 Hard Reset Solutions,How To-Samsung Galaxy S5830 Hard Reset ,

Samsung Galaxy S5830 Hard Reset Method

Sunday, November 2, 2014

How to Master Reset or Hard Reset a HTC X7500 Advantage

How

reset to factory settings
To perform a hard reset or Master reset, factory reset

Slide the Volume slider down and at the same time, use the stylus to press the RESET button at the back of your device.
After a brief period of time, two choices will appear on-screen. Press the CENTER OK button to perform the hard reset. Note If you do not want to perform a hard reset, press the CAMERA button to exit.
Press the POWER button.

Wednesday, October 29, 2014

How to Reset Android Phone Motorola Droid

How to Reset Motorola Droid

To reset your phone to factory settings and erase all the data on your phone,
Touch Menu > Settings
> Privacy > Factory data reset > Reset phone.
Warning: All data on your phone will be deleted.

Motorola Droid Hard reset with keys

Power off device.
Press X key on hard keyboard + power button, then release both buttons.

When you see exclamation point press and hold VOLUME UP + CAMERA KEY. You will see Android system recovery menu.
With D pad go to data / factory reset, then press CENTER D Pad, then choose Yes.

How to iPhone Master Reset or iPhone Restore a Apple Iphone 3G

To perform a master reset or hard reset on your Apple Iphone 3G you will need to:

Connect the iPhone to a computer, open up iTunes, then click " iPhone Restore button" which will wipe it clean of music and install the latest firmware it has.

Thursday, September 25, 2014

HTC Droid DNA KitKat PAC man ROM 4 4 2 Using How To Install Guide

HTC Droid DNA can be updated to latest Android 4.4.2 KitKat. The upgrade is possible with the help of custom ROM PAC-man. The development team of PAC-man ROM finally introduced Android 4.4.2 KitKat based PAC-man ROM for HTC Droid DNA. Which means, you can download and install custom firmware PAC-man to update your HTC Droid DNA to latest Android 4.4.2 KitKat. HTC Droid DNA comes with good hardware spec, hence is capable to run PAC-man smoothly. PAC-man ROM consist various features of Paranoid Android, AOKP and CyanogenMod. The link Im sharing is PAC-man nightly build. The good thing about nightly build is, you will receive update daily and bugs are fixed faster as well as new feature introduced regularly. Continue reading this guide to know how to install Android 4.4.2 KitKat based PAC-man custom ROM on HTC Droid DNA.
PAC-man comes with various useful customization. Since, PAC-man is based on Android 4.4.2 KitKat, you may like to know whats new on it. Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new procstats tool details memory use, Full-Lcd Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.
Please note, not all Android 4.4.2 KitKat feature yet ported to PAC-man ROM.

Another thing you should note, this is nightly build, hence expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable PAC-man build.
Warning!
This tutorial is only for HTC Droid DNA. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.
Pre Requisites:
1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.
2. Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You must have USB Driver Installed for HTC Droid DNA in your PC. [Download USB Drivers]
4. Make sure USB Debugging is enabled otherwise its wont be possible to transfer file between PC and HTC Droid DNA. [Guide].
5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]
If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based PAC-man ROM on HTC Droid DNA.
File Required(Download by clicking on it)

PAC-man For HTC Droid DNA [Filename: pac_dlx-nightly-20140514.zip]
Google Apps [Filename: pa_gapps-stock-4.4.2-20140207-signed.zip]

How to Install Android 4.4.2 KitKat based PAC-man ROM on HTC Droid DNA

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
Disconnect USB and then turn off your HTC Droid DNA.
Boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next Lcd, select Backup again. Go back to main recovery menu after backup is complete.
Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next Lcd to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
Select install zip from sdcard, then select choose zip from sdcard. Now, locate the PAC-man Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next Lcd. The ROM installation will begin.
Once the ROM installation process end, repeat the step 6 but choose the pa_gapps-stock-4.4.2-20140207-signed.zip file instead of ROM zip to install the Google apps package.
When installation is completed, go back to the main recovery menu and select reboot system now to reboot your HTC Droid DNA and boot up into Android 4.4.2 KitKat ROM PAC-man.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
Disconnect USB and then turn off your HTC Droid DNA.
Boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
Create a Backup using TWRP Backup Option.
Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the Lcd do a Swipe on the ‘Swipe to factory reset‘ option.
Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the PAC-man Zip file. Then tap on Add More Zips, and add pa_gapps-stock-4.4.2-20140207-signed.zip. Now at the bottom of the Lcd, do a swipe on the Swipe to confirm flash option to begin flashing.
When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your HTC Droid DNA and boot up into Android 4.4.2 KitKat ROM PAC-man.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.2 KitKat firmware based custom ROM PAC-man is now running on your HTC Droid DNA. Now explore the latest Android 4.4.2 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Tuesday, September 23, 2014

How to Install Android 4 2 2 for Galaxy Note 8 0 GT N5110 Stock Firmware Guide

N5110XXCMK1 Android 4.2.2 Jelly Bean Firmware Last Updated on 5-Feb-2014. Samsung Galaxy Note 8.0 GT-N5110 (WiFi) recently received the latest XXCMK1 Android 4.2.2 Jelly Bean official firmware update. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is N5110XXCMK1. The device was released with Android 4.1.2 Jelly Bean and receiving Android 4.2.2 Jelly Bean firmware update from August 2013. There is no news about any further android version update for the Galaxy Note 8.0 N5110. If you not yet updated your device to the latest available firmware, then do it now by following the tutorial below. The below guide will help you to download and install the N5110XXCMK1 Android 4.2.2 Jelly Bean Firmware manually through Odin. You can check the latest available firmware for your device through OTA (over the air) from Settings-About Tablet-Software Update.

If your Galaxy Note 8.0 N5110 already running on the Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update. It is always recommended to update device to the latest available firmware.

So, want to update your Galaxy Note 8.0 N5110 to the latest XXCMK1 Android 4.2.2 Jelly Bean firmware? For official way, either you can go for OTA update or download firmware through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.2.2 XXCMK1 firmware on your Galaxy Note 8.0 N5110 through Odin then follow the step by step manual update guide below.

Important Note:

"The firmware is released only for the Samsung Galaxy Note 8.0 GT-N5110 model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet".

Android 4.2.2 Jelly Bean N5110XXCMK1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 8.0 GT-N5110 model.

Nordic Countries: N5110XXCMK1_N5110OXXCMK1_NEE.zip
Slovakia: N5110XXCMK1_N5110OXXCMK1_XSK.zip
South East Europe: N5110XXCMK1_N5110OXXCMK1_SEE.zip
Germany: N5110XXCMK1_N5110OXXCMK1_DBT.zip
Slovenia: N5110XXCMK1_N5110OXXCMK1_SIO.zip
Portugal (TPH): N5110XXCMK1_N5110OXXCMK1_TPH.zip
Romania: N5110XXCMK1_N5110OXXCMK1_ROM.zip
Hungary: N5110XXCMK1_N5110OXXCMK1_XEH.zip
Baltic: N5110XXCMK1_N5110OXXCMK1_SEB.zip
Russia: N5110XXCMK1_N5110OXECMK1_SER.zip
Spain: N5110XXCMK1_N5110OXXCMK1_PHE.zip
United Kingdom: N5110XXCMK1_N5110OXACMJ2_BTU.zip
France: N5110XXCMK1_N5110OXXCMK1_XEF.zip

[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

Check battery percentage, your device should have at least 80% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 N5110XXCMK1 official firmware on Galaxy Note 8.0 N5110.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Note 8.0 N5110 through Odin:

Download Android 4.2.2 XXCMK1 Firmware for Galaxy Note 8.0 N5110 from the above list
Download Odin 3.07
Switch off your Tablet and boot Galaxy Note 8.0 N5110 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Note 8.0 N5110 to your computer via USB cable
In Odin3 Lcd, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin Lcd, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: N5110XXDLJ5_N5110ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your Tablet should automatically reboot after completion
You can now disconnect your Tablet from computer
Finish

Congrats! Your Galaxy Note 8.0 N5110 is ready now with the latest available firmware. Hope you successfully update XXCMK1 Android 4.2.2 Jelly Bean official firmware on Galaxy Note 8.0 GT-N5110. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.2.2 Jelly Bean build version XXCMK1. You can verify the firmware update details from Settings-About Tablet. For any queries feel free to contact with us any time and don’t forget to share your experience in the comment below.

Sunday, September 21, 2014

Hard reset Garmin Forerunner 310XT to Factory default settings

Hard

Hard reset Garmin Forerunner 310XT to Factory default settings

Performing a master reset Garmin Forerunner 310XT to factory default settings. It will erase all data on the fitness watch:

Turn Power off
Press and hold Enter and Mode buttons
Press and release Power button
Press and release Lap/Reset (watch will power off)
Wait 3 seconds
Release Enter and Mode

The reset on the Forerunner 310XT is only successful if the device finishes powering up, and goes to the setup wizard. Repeat the steps again if the setup wizard does not appear.

Leave the device outside with a clear view of the sky for a minimum of 20 minutes to acquire satellite data once the reset and setup wizard are complete.

Performing a soft reset

If your garmin hangs or does not responding press power buttons about 10 seconds.

Samsung Galaxy Ace 3 LTE S7275R Android 4 2 2 Jelly Bean Official Firmware How to Update Guide

The LTE version of Samsung Galaxy Ace 3 with model number GT-S7275R has received a new Android 4.2.2 Jelly Bean update with firmware build number S7275RXXUANB3. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: S7275RXXUANB3
CSC: S7275ROXXANB1
MODEM: S7275RXXUANB2
Version: Android 4.2.2
Build date: Feb 25, 2014
Regions: Nordic countries
Samsung Galaxy Ace 3 (LTE) S7275R users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Ace 3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.2.2 XXUANB3 Jelly Bean firmware is compatible only with the LTE version of Samsung Galaxy Ace 3 (GT-S7275R). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Ace 3 by navigating to Settings >> About Phone.
Files Required
1. Android 4.2.2 XXUANB3 Jelly Bean Firmware For Galaxy Ace 3 (LTE) S7275R
2. Odin 3.07
Steps to Update Galaxy Ace 3 (LTE) S7275R with Android 4.2.2 XXUANB3 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Ace 3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Ace 3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted S7275RXXUANB3 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy Ace 3 (LTE) S7275R should be now updated with Android 4.2.2 XXUANB3 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy Ace 3 (LTE) S7275R stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Saturday, September 20, 2014

How to Install Orange Amestris v7 3 Custom ROM on Galaxy S GT I9000

The Samsung Galaxy S GT I9000 handset can be updated with a new custom ROM. This time I will show you how to install the version 7.3 of the Amestris ROM into your phone’s system. The firmware will be bringing numerous features so that you will be able to change the looks of your device and also improve its capabilities. Also, this version is including bug fixes for resolving the issues reported by users who experienced the previous variants of the same ROM, this being the most stable software released so far.
Be aware that dealing with a custom ROM you will void the Samsung warranty. Be careful in what you do and follow this step by step guide for avoiding the unpleasant situations. Also, this is not an official update released by Samsung and has nothing to do with the already mentioned company; all you do, you do it by your own risk.
Now, as any ROMs available out there, the Amestris features its own software, meaning that it will bring specific features and capabilities for your Galaxy S GT. There will be added many tools which will power up the performances, so your phone will gain speed, the appearances will be improved, the battery life will get better and the OS will be opened for optimization and customization operations.
The Amestris ROM is being based on the official JW1 Samsung firmware so I don’t recommend you to apply this update if your S GT I9000 is running anything else different of the JW1 software. The OS upgrade will bring the Orange Magic experience to your device, a Lcdshot with the firmware running on a Galaxy S phone being illustrated below.

Orange

Orange Amestris v7.3 Lcdshot

Now, here is the list of the features which will be added once you install the Orange Amestris v7.3 Custom ROM on your Galaxy S GT I9000; check it and see if you find it satisfying enough in order to start flashing the same.

Features

Features to be added by the ROM

For being able to apply the update you must perform a full wipe. So, take your phone and reboot it by entering in recovery mode. The recovery mode menu can be reached by holding the Volume Up and the Home key buttons simultaneously while powering on the phone. From the menu that opens choose to wipe the data and cache stored on your smartphone.
A full wipe means that you will lose all of your personal info. That’s why you need to do a backup as well. In this way you can save the contacts, messages, apps and any other data stored on your Galaxy S. Just read our previous step by step guides:

There are also other things that must be prepared. You must charge the battery for making sure that the phone will not turn off when updating its OS. Then, deactivate the antivirus programs installed on the handset or on the computer you will use. Finally, you must have a rooted Galaxy S GT I9000 or else you can’t update it with the Orange Amestris v7.3 Custom ROM firmware.
Now, after completing the up mentioned tasks, you can take a look below where you have the proper tutorial explained and detailed so everyone can understand what to do. Do everything as in the steps.

How to update the Galaxy S GT I9000 with Orange Amestris v7.3 Custom ROM Firmware

Download the Amestris v7.3 Firmware Package from here and save the file to the computer.
Then connect the phone to the PC; use the USB cord for this.
Now, copy the file downloaded in step 1 from the computer to the phone’s SD card.
Disconnect the smartphone (remove the USB cable).
Turn it off.
Reboot by entering in recovery mode. This can be achieved by following the directions from above.
Remember to perform a full wipe.
Then, on the recovery mode menu select “install zip from sd card” and “choose zip from sd card” for being able to pick the ROM package placed on the SD card (see step 3).
The installation procedure should take a couple of minutes; just relax until it’s done.
Finally, when ended, you will be back on the recovery mode menu. Select “reboot system now”.

If you experience force close errors you should perform a wipe again. In the recovery menu choose the “Wipe data/factory reset” and “Wipe Cache partition” options and then “reboot system now”. That should resolve your problem. For any other issue contact us through the comments area below. We well do all that we can for helping you out. Also do tell us how the Orange Amestris v7.3 custom ROM is running and looking on your Samsung Galaxy S GT I9000 smartphone.

Thursday, September 18, 2014

T Mobile T839 Sidekick 4G Hard Reset to Factory Default Settings

T-Mobile T839 Sidekick 4G Hard Reset to Factory Default Settings

These are the steps and procedures on how to hard reset the T-Mobile T839 Sidekick 4G with Android OS, v2.2 (Froyo), 1 GHz ARM Cortex-A8 processor, PowerVR SGX540, GPU, Hummingbird chipset.
This is a simple guide if you want to return the device to its original factory settings again.

Please note: Just make a back up copy of all your personal data before proceeding because the result of this process will delete all data you previously installed on the device. Performing a factory reset is only advisable if you want to return back the phone to its original factory default settings and also fix some abnormal functions of the device.

T-Mobile Sidekick 4G Factory data reset:

1. On the main home Lcd, select menu
2. Select Settings, then Privacy
3. Select Factory data reset
4. Select Reset phone
5. Enter the password if prompted, then confirm by selecting Erase everything

T-Mobile Sidekick 4G Hard reset, this may help if the phone experience some hang or frozen on some applications:

1. Turn the phones power off. Take the battery out from the device, wait a couple of seconds and reinsert it back again.
2. Now, Hold the Volume Down button
3. Then press and hold the Power button until the device turns on
4. A menu will show up like: Fastbook, Recovery, Clear Storage, and Simlock
5. Just select Clear Storage by pressing the Volume Down button
6. Then press and release the Power button
7. Select Volume Up if YES and Volume Down for NO

Once the reset process is complete, the phone will then reboot to its factory fresh state settings.
Any data including third-party applications previously stored from the HTC Sensation already wiped or deleted.

How to Root Samsung Galaxy Chat B5330 B L Using Android 4 1 2 Jelly Bean Firmware Guide

Recognised XDA Developers, Chainfire recently released CF-Auto-Root file for variants of Samsung Galaxy Chat bearing model number GT-B5330/B/L.
CF-Auto-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. In essence, it does nothing but install and enable SuperSU on your system, so apps can gain root access. Head over to the CF-Auto-Root main thread to learn more about the root method.
Samsung Galaxy Chat B5330/B/L users who have already installed their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.
Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-requisites
1. Install USB Driver for Samsung Galaxy Chat on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options (Android 4.0 or later) or go to Settings >> Applications >> Development (Android 2.3 or earlier).
3. Make a backup of all your important data before following the guide.
4. The Galaxy Chat should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy Chat B5330/B/L. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Chat by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy Chat GT-B5330 (CF-Auto-Root-zanin-zaninxx-gtb5330.zip), GT-B5330B (CF-Auto-Root-zanin-zaninvj-gtb5330b.zip), or GT-B5330L (CF-Auto-Root-zanin-zaninub-gtb5330l.zip)
2. Odin 3.07
Steps to Root Galaxy Chat B5330/B/L Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy Chat. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy Chat to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root with .tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Samsung Galaxy Chat B5330/B/L running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Wednesday, September 17, 2014

How to Root Samsung Galaxy Note 3 Neo 3G SM N750 on Using Android 4 3 Jelly Bean Firmware

How

Samsung Galaxy Note 3 Neo (3G) SM-N750 users who wish to root their devices, may follow the tutorial below.

This tutorial uses CF-Auto-Root file released by Senior Recognized XDA-Developers, Chainfire. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-requisites
1. Install USB Driver for Samsung Galaxy Note 3 Neo on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the 3G version of Galaxy Note 3 Neo (SM-N750). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 3 Neo by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root (CF-Auto-Root-hl3g-hl3gub-smn750.zip)
2. Odin 3.09

Steps to Root Galaxy Note 3 Neo (3G) SM-N750 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.09 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy Note 3 Neo. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Note 3 Neo to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 5: In Odin, click the AP button and select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Note 3 Neo (3G) SM-N750 running on Android 4.3 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.

How to Fix "Unfortunately, SuperSU has stopped"?
Step 1: Download and install the latest APK of SuperSU on your device.
Step 2: Open SuperSU app (update the binary if prompted) and allow it to disable KNOX.
Step 3: Reboot your device.

Tuesday, September 16, 2014

How to Update Samsung Galaxy Chat B5330 Android 4 1 2 XWUBMD2 Jelly Bean Firmware Using Odin Guide

Southeast Asia owners of the Samsung Galaxy Chat GT-B5330 is now going to receive official Android 4.1.2 Jelly Bean update. This update Brings several improvements and features of Android Jelly Bean such as Google Now and Project Butter which boosts the phones entire performance.
Firmware details
PDA: B5330XWUBMD2
CSC: B5330OLBBMD2
Version: Android 4.1.2
Built date: May, 2013
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand
Android 4.1.2 official update for Galaxy Chat is packed with the following features:
- Google Now service for intelligent voice search.
- Project Butter for smooth and responsive user interface.
- User interface and notifications of the Samsung UI has been improved.
- Boost in the overall performance of the handset.

The official firmware is now available for download via Over-The-Air (OTA) update as well as through Samsung KIES. However, those who fail to upgrade their devices with Android 4.1.2 XWUBMD2 Jelly Bean via official method, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Driver for Galaxy Chat B5330 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings > Developer Options (Android 4.0 or later) or go to Settings > Applications > Development (Android 2.3 or earlier).
3. Make a backup of all your important data before following the guide.
4. The Galaxy Chat should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Android 4.1.2 XWUBMD2 Jelly Bean firmware is compatible only with Samsung Galaxy Chat B5330 and installing this on any incorrect variant will brick the device. Verify the model number of the Galaxy Chat by navigating to Settings > About Phone.
File Required
1. Android 4.1.2 XWUBMD2 Jelly Bean Firmware
2. Odin 3.07
Steps to Update Galaxy Chat B5330 with Android 4.1.2 XWUBMD2 Jelly Bean Firmware
Step 1: Extract Firmware zip file that you downloaded already from above link, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Chat to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 7: Choose the following files in Odin from extracted B5330XWUBMD2 firmware folder by using respective checkboxes:

Select the PDA checkbox, and choose the file named .tar or .md5.
Click the Phone checkbox, and choose the file with modem in its name (ignore if there is no such file)
Click the CSC checkbox, and select the file with csc in its name (ignore if such file is missing)
Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the flashing process.
Step 10: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Chat B5330 should be now updated with official Android 4.1.2 XWUBMD2 Jelly Bean firmware. Head over to Settings > About Phone to verify the software version running on the device.

Note: If Galaxy Chat B5330 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Chat B5330 running on Android 4.1.2 Jelly Bean firmware.

How To Install Android 4 4 Kitkat In Samsung Galaxy S3 I9305 LTE

Warnings:
Below are some warning statements that you must be knowing before preparing to Root orInstall Custom Rom in your Samsung Galaxy S3 LTE Android Smartphone:

Rooting/Installing Custom ROM is not an authorized process hence you’ll be losing all your warranty benefits over your Samsung Galaxy S3 LTE after Rooting/Installing it.
There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom ROM installation process.
You might not receive any future official software or firmware updates after rooting and installing Custom ROM in your Samsung Galaxy S3 LTE.

Before You Begin:

You need a Windows based PC or Laptop.
Root & Install Custom Recovery in your Samsung Galaxy S3 LTE.(Links are given in Some Important Articles section above)
Download Samsung USB Drivers and connect your device with PC for complete the installation.

SAMSUNG:

Download Samsung USB Drivers or Download Samsung Kies (Contains Drivers).

Enable USB Debugging in your Samsung Galaxy S3 LTE.Click Here if you don’t know how to enable.
Your device must be charged 50% minimum.
Make backup of device data for safety.

Download Required Files:

How To Update Samsung Galaxy S3:

Follow all the instruction given above for safe installation.
Now connect you device to PC with USB cable.
Move or Copy both downloaded files on your external sdcard.
Now switch off your device and boot into recovery mode.To do this, Press and Hold Volume Up + Home and Power buttons.
Once you’re in Recovery Mode, Select wipe data/factory reset, followed by wipe cache and wipe dalvik cache from advanced.
Now go back to the main menu of Recovery Mode and select “install zip from SD card”.
Select and Install custom rom zip file and then GApps package.
After successful installation, go back to main menu of Recovery Mode and select reboot system now.
First boot can take upto 5 minutes.

Monday, September 15, 2014

Nexus 7 LTE 2013 Android 4 4 2 KitKat PAC man ROM Install How To Guide

Nexus 7 2013 LTE can be updated to latest Android 4.4.2 KitKat. The upgrade is possible with the help of custom ROM PAC-man. The development team of PAC-man ROM finally introduced Android 4.4.2 KitKat based PAC-man ROM for Nexus 7 2013 LTE. Which means, you can download and install custom firmware PAC-man to update your Nexus 7 2013 LTE to latest Android 4.4.2 KitKat. Nexus 7 2013 LTE comes with good hardware spec, hence is capable to run PAC-man smoothly. PAC-man ROM consist various features of Paranoid Android, AOKP and CyanogenMod. The link Im sharing is PAC-man nightly build. The good thing about nightly build is, you will receive update daily and bugs are fixed faster as well as new feature introduced regularly. Continue reading this guide to know how to install Android 4.4.2 KitKat based PAC-man custom ROM on Nexus 7 2013 LTE.
PAC-man comes with various useful customization. Since, PAC-man is based on Android 4.4.2 KitKat, you may like to know whats new on it. Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new procstats tool details memory use, Full-Lcd Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.
Please note, not all Android 4.4.2 KitKat feature yet ported to PAC-man ROM.

Another thing you should note, this is nightly build, hence expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable PAC-man build.
Warning!
This tutorial is only for Nexus 7 2013 LTE. Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.
Pre Requisites:
1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.
2. Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You must have USB Driver Installed for Nexus 7 2013 LTE in your PC. [Download USB Drivers]
4. Make sure USB Debugging is enabled otherwise its wont be possible to transfer file between PC and Nexus 7 2013 LTE. [Guide].
5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]
If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based PAC-man ROM on Nexus 7 2013 LTE.
File Required(Download by clicking on it)

PAC-man For Nexus 7 2013 LTE [Filename: pac_deb-nightly-20140514.zip]
Google Apps [Filename: pa_gapps-stock-4.4.2-20140207-signed.zip]

How to Install Android 4.4.2 KitKat based PAC-man ROM on Nexus 7 2013 LTE

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
Disconnect USB and then turn off your Nexus 7 2013 LTE.
Now, boot into recovery mode. Press and hold Volume Down + Power key together and release the Power key once the Google logo appears, but keep holding the Volume Down key. You will be in Bootloader mode now. Press Volume Down two times so that Recovery option appears, and then press Power key to reboot into recovery mode. Use Volume keys to browse between options in recovery while Power key to select an option. Alternatively try this: Recovery Mode without Key Combination.
Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next Lcd, select Backup again. Go back to main recovery menu after backup is complete.
Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next Lcd to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
Select install zip from sdcard, then select choose zip from sdcard. Now, locate the PAC-man Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next Lcd. The ROM installation will begin.
Once the ROM installation process end, repeat the step 6 but choose the pa_gapps-stock-4.4.2-20140207-signed.zip file instead of ROM zip to install the Google apps package.
When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Nexus 7 2013 LTE and boot up into Android 4.4.2 KitKat ROM PAC-man.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Tutorial For TWRP Recovery Users:

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
Disconnect USB and then turn off your Nexus 7 2013 LTE.
Now, boot into recovery mode. Press and hold Volume Down + Power key together and release the Power key once the Google logo appears, but keep holding the Volume Down key. You will be in Bootloader mode now. Press Volume Down two times so that Recovery option appears, and then press Power key to reboot into recovery mode. Alternatively try this: Recovery Mode without Key Combination.
Create a Backup using TWRP Backup Option.
Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the Lcd do a Swipe on the ‘Swipe to factory reset‘ option.
Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the PAC-man Zip file. Then tap on Add More Zips, and add pa_gapps-stock-4.4.2-20140207-signed.zip. Now at the bottom of the Lcd, do a swipe on the Swipe to confirm flash option to begin flashing.
When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Nexus 7 2013 LTE and boot up into Android 4.4.2 KitKat ROM PAC-man.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.2 KitKat firmware based custom ROM PAC-man is now running on your Nexus 7 2013 LTE. Now explore the latest Android 4.4.2 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

How to esay Root Nexus 5 on Android 4 4 1 KOT49E KitKat and Install CWM TWRP Recovery

Google has just released Android 4.4.1 update to version Kitkat KOT49E build for Nexus 5. The new official update is now available as an Over-The-Air (OTA) update.

Note: You can manually download the OTA for Nexus 5 directly from Google Server Update and follow the step-by-step guide to install the update manually.

Nexus 5 users who already updated their devices with Android 4.4.1 KOT49E KitKat, can eradicate the equipment they are using the tutorial below.

Disclaimer: Rooting your device voids the warranty. Our developers and rooting procedure is not responsible if there are undesirable results can occur on your device. use this guide to root solely at your own risk!

Pre-requisites

1. Make a backup of all your important data before following the guide.

2. Enable USB Debugging Mode on the phone. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.

3. The Nexus 5 bootloader should be unlocked.

4. Ensure the battery of the phone is charged more than 80 percent.

5. The CWM/TWRP Recovery and SuperSU files compatible only with the Nexus 5. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 5 by navigating to Settings >> About Phone.

Files Required

3. CWM or TWRP Recovery

4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 5 Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery

Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your Nexus phone to the computer, which is mandatory for the rooting process.

Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.

Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.

Step 5: Connect the Nexus 5 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your phone.

Step 6: Switch off the Nexus 5. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.

Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.5-hammerhead.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.

Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.

Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 5 running on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer of the Nexus 5 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Subscribe to: Posts (Atom)

blogger counters