Complete Fix Solution

Showing posts with label on. Show all posts

Friday, November 14, 2014

Sony Ericsson K750 Camera Problem

Camera Operation Failed Camera On Standby Camera Not Working

Wednesday, November 12, 2014

iPhone 3Gs no lights on LCD Solution

Thursday, November 6, 2014

Nokia C2 01 power button On Off switch not working ways jumpers

If Nokia C2-01 is not getting power On and it can make charging. It is 100% fault of on off button in it.because On Off button on keypad is not working so that it will not be able to power On.All cellular mobile repair solution Nokia 2320 Classic Camera Problem Solution Jumpers Ways

Nokia C2-01 power button On Off switch not working ways jumpers.Replace battery and check if mobile can not be switch On dis assemble the phone and check power switch button ways as given in above diagram.If any print out of these is missing apply jumpers to solve On Off Button problem in Nokia C2-01 .
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.

Sunday, October 26, 2014

Nokia 1800 and Nokia 1616 Power ON OFF switch Key Line paths for Nokia working solution

Heres the solution to repair Nokia 1616 and Nokia 1800 power ON/OFF switch problem.
This problem may cause the device unable to power up when hitting the power key. The problem may easily configured if the power ON and OFF switch key has no response, but the device is not totally dead for it shows a charging indication when you charge it up. Now, this solution simply shows the line paths (ON OFF ways)of the power key.

Nokia 1616, 1800 Power ON OFF switch Line Paths (ON and OFF ways)

Hints for repair: when the device will unable to power up when hitting the power key button but it shows charging indication when you plug-in the battery charger, the problem may possibly lies on the power key line paths. But before tracing the line paths, you must see to it that the keypad membrane is perfectly clean and free from dirt, corrosion and oxidation.

You can check the power ON/OFF voltage to the inner core of the switch key terminal pads, this voltage may range approximately from 1to 3 volts. If there is no voltage reading you get on that spot, locate and trace the test spots for the power switch, see the picture guide above, it is located just near the keypad LED. Make a continuity check by using a multimeter to those corresponding spots indicated on the picture guide, from the power key pads through to each corresponding component. The outer core is connected to a chip capacitor located near the clock crystal oscillator.

Saturday, October 25, 2014

Sync Contacts on Android with Gmail Account

If you love to customize your Android device then you should know it is very easily to sync your contacts stored on your device with the device’s designated Gmail account.
This method will help you to keep your contacts from the phone, or Google plus contacts synchronized with your Gmail account, you can easy perform all new changes and after that to sync with your Gmail account in several steps.
Syncing all your contacts stored in your Android device with Gmail accounts is important if you want to root your device, or to update with new firmware your phone.
When you’ll root or updating your phone, you’re risking always to lose data stored on your device, this data can be SMS text messages, MMS, and your contacts. This thing makes us search a solution to prevent this type of data corruption, for helps the Android Users to don’t corrupt them contacts I will present how sync the Android contacts with the Gmail account successfully.
Before guide, you should verify if your contacts are linked with your Gmail account.

First Open Contacts.

Now press the Menu>Settings button

Select the ‘Merge with Google’ after that confirms the action. If you have more than one Gmail accounts you should select the one account which you want to be the default account to host your contacts.

A pop-up notify message will appear if everything has been successfully merged.

How to sync your contacts with Gmail account guide:

First verify if you have a Gmail installed on your Android device.
Open the App Drawer>Settings>Accounts and Sync
Enable the Accounts and syncing service.
Now should select your Gmail account from the e-mail accounts setup.
Verify and make sure that you have enabled ‘Sync Contacts’ Option.
Press ‘Sync now’ button and now wait until all your contacts stored on your device have been successfully synchronized with your Gmail account.
Open Gmail account on a web browser in an external PC and click the Gmail text link that is listed on the upper left side of your Gmail profile.
Now should select Contacts and then see a page with all the contacts from your Android smartphone have been stored.

That’s all should do it to sync your Android contacts with your account. If you have supplementary extra questions fell free to ask in our comment section.
If you have rooted your device and select factory reset, or you’ve change the custom ROMs, then you’ll need to sync your Gmail account again with your device, and all the phone number and contacts will be restored in your phone; otherwise all your contacts will be remove.

Friday, October 24, 2014

Android Phone Complete Note on What is Rooting and Benefits of Rooting Guide

Confuse with whether to root your android phone or not? Lets have a look on what is rooting and benefits of rooting android phone. Rooting is a very common term amongst android users. After having an Android Smartphone or Tablet, most of us search Internet for a rooting guide for the device. However, in this article we are not going to give you any rooting guide to root your android phone, instead you’ll get a clear idea about rooting android phone, Advantages and disadvantages of rooting android devices, so that you can decide yourself whether to root your android phone or not.So, what is rooting? Rooting is basically a way to get admin right or full control over phone’s operating system. Manufacturers are used to inactive some of the advance system features by default to prevent average users from causing damage to mobile operating system. Android is most customizable mobile operating system ever but most of the advance features stay inactive by default. Rooting helps to remove all those limitations and give you the full power to control or customize advance settings, features, and performance of your phone.

Also Read: Data Backup Guide for Android Users

Benefits of rooting android phone

After rooting your android phone, you can do a number of advance tasks with your android phone. Find below some of the most important task you can do with your rooted android phone. advantages or benefits of rooted android phone includes:

*** Runs various Apps which ask root permission: One of the great advantage of having an android powered phone is that, you can download and install tons of free apps from the Google Play Store which give your android experience a different level. However most of the great apps in Google Play Store works with rooted android phone. There are plenty of normal apps available which works with non rooted android phone but root apps allow more features and control to access system settings and tweak various features. So, if you have a rooted android phone, you can enjoy lots of great apps from Google Play Store.

Also Read: Download Latest Gapps for Android Phone

*** Flash Various Custom ROMs: One of the most important advantage of rooting android phone is that, you can enjoy various custom ROMs on a rooted android phone. If you don’t know, Custom ROMs are made from the source of official firmware by third party developer which provide many customizable features, increase overall processor speed, change the overall look of your android phone and many more. With a rooted android phone you can enjoy various custom ROMs like- CyanogenMod, ParanoidAndroid, AOKP, PACman, SLIM ROMs, MIUI and much more.

*** Free up lots of System Memory: One of the major complain of android users that internal memory is full of defaults apps and very low space for installing new apps. Its true that most android phone comes with huge system apps by default which takes a big amount of internal memory. But with a rooted android phone, you can transfer apps to External SD Card or install apps to SD card. Hence you can free up lots of internal memory space.

Disadvantages of rooting android phone

Yes, along with many benefits, rooted android phone have disadvantages too. Check out below to find disadvantages of rooting android phone.

*** Rooting void manufacturer warranty: The main disadvantage of rooting android phone is that root void the phone’s manufacturer warranty. Means, once you rooted your phone, your phone’s manufacturer will not give you warranty even if your phone is in warranty period. The service centers will charge for any service they provide for the phone. But this is not a serious issue as you can un-root your device any time and get back your manufacturer warranty by re-installing the official firmware.

Also Read: Download USB Driver for Your Android Phone

*** Rooting might brick your phone: First up all you should know that rooting your phone is a very serious task and should be done carefully. You’ll find a number of rooting software and tools that help rooting process very easy even for normal user but ones should take help from advance android users who have already done the rooting process. Follow every step carefully while rooting your phone else you might end with Bricking your phone. Taking any wrong step or flashing corrupted root file may cause your phone brick, means your phone will be dead.

Hope you now understand what is rooting and disadvantages and benefits of rooting android phone. Rooting voids manufacturer warranty, rooting might brick your phone but if you can take the risk then you can experience all those great apps, custom ROMs and much more. Its now on you, whether you want to root your phone or not. If you want to know anything else related to rooting android phone, then feel free to contact with us using the comment form below.

Thursday, October 23, 2014

Blackberry 8310 dead solution and shot not power on solution

blackberry 8310 dead solution,blackberry 8310 not power on solution, blackberry 8310 shot not power on solution,blackberry full shot not power on solution ,blackberry 8210 not power solution, blackberry power switch not working solution 8310 blackberry power not working solution, blackberry dead solution 100% tested only change 1 diot solve problem , blackberry not working solution here,

blackberry 8210 dead shot solution 100% tested solution

blackberry shot not power on solution , blackberry 8310 power switch not working solution , blackberry shot solution,blackberry 8310 full shot 100% tested solution,blackberry dead solution,blackberry shot dead solution 100% tested here,if u need blackberry 8310 dead solution see this i hope solve your problem.

Saturday, September 20, 2014

How to Install Orange Amestris v7 3 Custom ROM on Galaxy S GT I9000

The Samsung Galaxy S GT I9000 handset can be updated with a new custom ROM. This time I will show you how to install the version 7.3 of the Amestris ROM into your phone’s system. The firmware will be bringing numerous features so that you will be able to change the looks of your device and also improve its capabilities. Also, this version is including bug fixes for resolving the issues reported by users who experienced the previous variants of the same ROM, this being the most stable software released so far.
Be aware that dealing with a custom ROM you will void the Samsung warranty. Be careful in what you do and follow this step by step guide for avoiding the unpleasant situations. Also, this is not an official update released by Samsung and has nothing to do with the already mentioned company; all you do, you do it by your own risk.
Now, as any ROMs available out there, the Amestris features its own software, meaning that it will bring specific features and capabilities for your Galaxy S GT. There will be added many tools which will power up the performances, so your phone will gain speed, the appearances will be improved, the battery life will get better and the OS will be opened for optimization and customization operations.
The Amestris ROM is being based on the official JW1 Samsung firmware so I don’t recommend you to apply this update if your S GT I9000 is running anything else different of the JW1 software. The OS upgrade will bring the Orange Magic experience to your device, a Lcdshot with the firmware running on a Galaxy S phone being illustrated below.

Orange Amestris v7.3 Lcdshot

Now, here is the list of the features which will be added once you install the Orange Amestris v7.3 Custom ROM on your Galaxy S GT I9000; check it and see if you find it satisfying enough in order to start flashing the same.

Features to be added by the ROM

For being able to apply the update you must perform a full wipe. So, take your phone and reboot it by entering in recovery mode. The recovery mode menu can be reached by holding the Volume Up and the Home key buttons simultaneously while powering on the phone. From the menu that opens choose to wipe the data and cache stored on your smartphone.
A full wipe means that you will lose all of your personal info. That’s why you need to do a backup as well. In this way you can save the contacts, messages, apps and any other data stored on your Galaxy S. Just read our previous step by step guides:

There are also other things that must be prepared. You must charge the battery for making sure that the phone will not turn off when updating its OS. Then, deactivate the antivirus programs installed on the handset or on the computer you will use. Finally, you must have a rooted Galaxy S GT I9000 or else you can’t update it with the Orange Amestris v7.3 Custom ROM firmware.
Now, after completing the up mentioned tasks, you can take a look below where you have the proper tutorial explained and detailed so everyone can understand what to do. Do everything as in the steps.

How to update the Galaxy S GT I9000 with Orange Amestris v7.3 Custom ROM Firmware

Download the Amestris v7.3 Firmware Package from here and save the file to the computer.
Then connect the phone to the PC; use the USB cord for this.
Now, copy the file downloaded in step 1 from the computer to the phone’s SD card.
Disconnect the smartphone (remove the USB cable).
Turn it off.
Reboot by entering in recovery mode. This can be achieved by following the directions from above.
Remember to perform a full wipe.
Then, on the recovery mode menu select “install zip from sd card” and “choose zip from sd card” for being able to pick the ROM package placed on the SD card (see step 3).
The installation procedure should take a couple of minutes; just relax until it’s done.
Finally, when ended, you will be back on the recovery mode menu. Select “reboot system now”.

If you experience force close errors you should perform a wipe again. In the recovery menu choose the “Wipe data/factory reset” and “Wipe Cache partition” options and then “reboot system now”. That should resolve your problem. For any other issue contact us through the comments area below. We well do all that we can for helping you out. Also do tell us how the Orange Amestris v7.3 custom ROM is running and looking on your Samsung Galaxy S GT I9000 smartphone.

Friday, September 19, 2014

Nokia 5530 power on just variation tested solution here

Nokia 5530 power on just variation tested solution here.
try this solution one by one

Step1:check bsi line.bsi line cut. apply this jumper.

Step2.try flash same product code.

step3.remove this N2121.

Wednesday, September 17, 2014

Nokia X2 00 power on off Ways Solution

Nokia X2 with Battery Power Ways, Power Button, Power Key, Power Switch, Power Problem
nokia x2-00 power on off
Nokia-x2-power-on-off-ways
nokia x2 power ways, nokia x200 switch on problem, how to repair nokia x2-00 power button.
nokia x2-00 power switch ways, x2 on off ways, nokia x2 power solution, nokia x2 button problem, nokia x2 00 on off solution ways

Nokia X2-00 Power Key Ways.
Nokia X2-00 Power switch ways

How to Root Samsung Galaxy Note 3 Neo 3G SM N750 on Using Android 4 3 Jelly Bean Firmware

Samsung Galaxy Note 3 Neo (3G) SM-N750 users who wish to root their devices, may follow the tutorial below.

This tutorial uses CF-Auto-Root file released by Senior Recognized XDA-Developers, Chainfire. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-requisites
1. Install USB Driver for Samsung Galaxy Note 3 Neo on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the 3G version of Galaxy Note 3 Neo (SM-N750). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 3 Neo by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root (CF-Auto-Root-hl3g-hl3gub-smn750.zip)
2. Odin 3.09

Steps to Root Galaxy Note 3 Neo (3G) SM-N750 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.09 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy Note 3 Neo. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Note 3 Neo to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 5: In Odin, click the AP button and select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Note 3 Neo (3G) SM-N750 running on Android 4.3 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.

How to Fix "Unfortunately, SuperSU has stopped"?
Step 1: Download and install the latest APK of SuperSU on your device.
Step 2: Open SuperSU app (update the binary if prompted) and allow it to disable KNOX.
Step 3: Reboot your device.

Monday, September 15, 2014

How to esay Root Nexus 5 on Android 4 4 1 KOT49E KitKat and Install CWM TWRP Recovery

Google has just released Android 4.4.1 update to version Kitkat KOT49E build for Nexus 5. The new official update is now available as an Over-The-Air (OTA) update.

Note: You can manually download the OTA for Nexus 5 directly from Google Server Update and follow the step-by-step guide to install the update manually.

Nexus 5 users who already updated their devices with Android 4.4.1 KOT49E KitKat, can eradicate the equipment they are using the tutorial below.

Disclaimer: Rooting your device voids the warranty. Our developers and rooting procedure is not responsible if there are undesirable results can occur on your device. use this guide to root solely at your own risk!

Pre-requisites

1. Make a backup of all your important data before following the guide.

2. Enable USB Debugging Mode on the phone. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.

3. The Nexus 5 bootloader should be unlocked.

4. Ensure the battery of the phone is charged more than 80 percent.

5. The CWM/TWRP Recovery and SuperSU files compatible only with the Nexus 5. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 5 by navigating to Settings >> About Phone.

Files Required

1. Android SDK

2. Fastboot

3. CWM or TWRP Recovery

4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 5 Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery

Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your Nexus phone to the computer, which is mandatory for the rooting process.

Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.

Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.

Step 5: Connect the Nexus 5 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your phone.

Step 6: Switch off the Nexus 5. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.

Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.5-hammerhead.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.

Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.

Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 5 running on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer of the Nexus 5 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Sunday, September 14, 2014

How to Link Duplicate Contacts on Sony Xperia Z1

Duplicate contacts usually happens when you import your old contacts to your new device or when you synchronize your contacts with the other account. You can avoid duplicate contacts and instead link these two to create a single entry. If you happen to link two contacts by mistake, you can separate them again. Heres how you can link two contacts.

1. On your devices homeLcd, tap on

.
2. Tap on

and tap the contact you want to link with another contact.
3. Press on

and tap Link contact.
4. And tap the contact whose information you want to be linked with the first one. Tap OK to confirm. The first contact no longer appears on your contact list but is merged with the second contact.

Now if you mistakenly linked two contacts

1. Tap on

on your homeLcd and then tap on

.
2. Then tap on the linked contact you want to edit.
3. And tap on

. Tap on Separate on the list and tap on OK to confirm.

Wednesday, September 10, 2014

How to Easily Root Galaxy S3 LTE ON I9305 Android 4 3 Jelly Bean Firmware

How to Easily Root Galaxy S3 (LTE) ON I9305 Android 4.3 Jelly Bean Firmware_LTE version of the Samsung Galaxy S3 at the model number GT-I9305 has gained Jelly Bean Android 4.3 firmware update with build number I9305XXUEMKC. The new official firmware that is currently available as an Over-The-Air (OTA) update or through Samsung Kies.

Samsung Galaxy S3 (LTE) I9305 users who have updated their devices with Android 4.3 Jelly Bean, can root their devices by using the following tutorial.

This tutorial uses the CF-Auto-Root files released by XDA-Developers Senior Recognized, Chainfire. File CF-Auto-Root Galaxy S3, allowing users to root their devices easily without depending on the firmware. It is really support for Android 4.3 Jelly Bean and the upcoming firmware as well. To get to the main thread CF-Auto-Root to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites

1. Install USB Drivers for Samsung Galaxy S3 on the computer.

2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the phone is charged more than 80 percent.

6. The CF-Auto-Root file works only on the LTE version of the Samsung Galaxy S3 (GT-I9305). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

Files Required

1. CF-Auto-Root for Galaxy S3 (LTE) I9305 (CF-Auto-Root-m3-m3zh-gti9305.zip)

2. Odin 3.07

Steps to Root Galaxy S3 (LTE) I9305 Running on Android 4.3 Jelly Bean Firmware

Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.

Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.

Step 3: Launch Odin on the computer as an Administrator.

Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-m3-m3zh-gti9305.tar.md5file.

Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.

Step 7: Double-check and click Start in Odin. The installation process will now begin.

Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S3 (LTE) I9305 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Root Galaxy Note 2 N7100 on XXDME1 Jellybean 4 1 2 Firmware – Guide

All those who have updated their Samsung GALAXY Note 2 smartphone with the XXDME1 version of Jellybean 4.1.2 firmware can now be rooted easily with the help of a simple procedure which we will be discussing in the due course of this article.

Once you have rooted the device, you can then install the apps which need root access and also you can install custom ROM firmwares which we will be coming out very soon. So, before we proceed on to the guide to root the device, you will need to follow the list of pre requisites mentioned below.

Note: Rooting your Galaxy Note 2 N7100 smartphone will void the warranty, to restore back the lost warranty, you need to re-apply the firmware of XXDME1 of whose the link is mentioned below.

Quick Pre Requisites:

All the data in your Samsung Galaxy Note II should be backed up with the help of below mentioned steps. It’s recommended to not to use the KIES for taking the backup as it may not help you restore the data.

SMS – Use “SMS Backup & Restore app”,Contacts – Sync with the Gmail application,Call Log -Call Log and RestoreImages, Songs, Videos, Files – Copy to internal / External SD Card,APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

Enable the USB Debugging from the path “Settings > Applications > Development > USB debugging” and also you will have to ensure that the minimum battery life should be 40% so as to ensure that the phone doesn’t get turned Off in the middle of update.

Disclaimer: We should not be held responsible or liable in any manner for any damage caused due to not following instructions.

Once you are done with following all the above mentioned instructions, you can now proceed to the next step where we have mentioned a detailed tutorial on how to update your Galaxy Note 2 N7100 with the Jellybean 4.1.2 firmware.

Procedure to Update Galaxy Note II with Jellybean 4.1.2 XXDME1 Firmware:

Download XXDME1 Jellybean 4.1.2 Rooting Package and Odin from here to your computer. Once downloaded, open Odin in your computer. Extract the rooting package to get the tar file.

Now, turn Off your Phone so that it can be entered in the Download Mode. The Download Mode can be entered by first turning Off the device and then Hold Volume Down + Menu Button and while holding both Keys to Power ON the device till you see the Green Robot on the Lcd which is nothing but the Download Mode.

In Download Mode, connect your phone to computer with original USB cable to see ID: COM section turn Yellow / Blue which indicated that all the drivers are installed successfully.

Click on “PDA” to select the rooting file which you got after extracting the rooting package in initial step. Now, click on “Start” to start the process of firmware update. Once the process is done, the phone will be rebooted. Please note that the process of rooting will take around 2 – 4 minutes of time.

Once you see the home Lcd in your phone, all you need to do is to just disconnect the device and check whether the firmware is updated successfully or not.

Note: If the device gets into the boot loop sequence or say gets stuck in the welcome Lcd, just long press the Power button and re follow the above instructions so as to again follow the above mentioned instructions.

So there you go, you have successfully rooted your Galaxy Note 2 with Official Jellybean 4.1.2 firmware of XXDME1. Do share with us in the comments section just in case if you face any issues in the process of firmware update.

Friday, September 5, 2014

How to Restore Backup From Your Online Storage on HTC One M8

If you used HTC Backup before, you can restore your backup to HTC One when you turn the phone on for the first time or after a factory reset.

Note: Depending on the amount of content, restoring your backup to your phone through your data connection may incur additional data costs and take a long time. Using a Wi-Fi® connection is recommended.

1. When youre asked whether you have a Google® Account, sign in to your account.

2. Use your mobile data or Wi-Fi connection to connect your phone to the Internet.

3. If you used your Google login credentials as your HTC Account and your backup is in Google Drive™, tap Sign in with Google.

If not, tap Remind me later, go to the Transfer or restore screen, and select Restore from HTC Backup.

4. Follow the onscreen instructions to restore your backup and to continue setting up your phone.

5. Slide open the Notifications panel to check if theres any notification to finish setting up your phone.

Free apps from Google Play™ will be restored in the background, and you can track the progress via a notification in the status bar. To restore paid apps, you need to download and install them from Google Play.

Your apps will appear on the Apps screen as they are installed. The Apps and Home screen shortcuts will be reorganized as in your backup after all of your apps have been installed. You may continue using HTC One while apps are being restored.

How to Root Samsung Galaxy S Duos 2 S7582 on Android 4 2 2 Jelly Bean and Install CWM Recovery GuideS7582

Samsung Galaxy S Duos 2 S7582 users who wish to root and install ClockworkMod Recovery (CWM) on their devices, may follow our step-by-step guide.
This tutorial uses CWM recovery released by XDA-Developers member, ahmedhameed. The CWM recovery allows Galaxy S Duos 2 users to root their devices without any difficulty.
Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-Requisites
1. Install USB Drivers for Samsung Galaxy S Duos 2 on your computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S Duos 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CWM recovery works only on the Galaxy S Duos 2 (GT-S7582). Applying this on any incorrect variant might brick the device. Verify the model number of the Galaxy S Duos 2 by selecting Settings >> About Phone.
Files Required
1. CWM (Mirror Link) (recovery.tar.md5)
2. SuperSU (UPDATE-SuperSU-v1.34.zip) or the latest version
3. Odin 3.07
Steps to Install CWM Recovery on Galaxy S Duos 2 S7582
Step 1: Extract the Odin 3.07 file using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Copy the SuperSU .zip file to the SD card of your phone.
Step 3: Switch off the Galaxy S Duos 2. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy S Duos 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 6: In Odin, click the PDA button and select the recovery.tar.md5 file. Make sure that the F. Reset Time, Auto Reboot and Re-Partition checkboxes are NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Steps to Root Galaxy S Duos 2 S7582 via CWM Recovery
Step 9: Boot the device into CWM recovery by pressing and holding Volume Up, Home and Power buttons together.
Step 10: In CWM recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once the installation process completes, return to main recovery menu and select "reboot system now".
Samsung Galaxy S Duos 2 S7582 running on Android 4.2.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.
Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.
Screenshot: Install CWM recovery via Odin

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.
Read also: How to Update Galaxy S Duos 2 S7582 with Android 4.2.2 DDUANC1

S7582DDUANC1

Jelly Bean Official Firmware

Monday, September 1, 2014

i Phone 3GS Solution for no vibration on i

Argh, seems like iPhone 3GS has issues with is vibrator. For some mysterious reason, my iPhone stopped vibrating, Although some people blamed the missing vibration problem on firmware issues, however already I had the most recent firmware on.

Then I stumbled upon this tip which pretty much says to turn on vibrate and hit the phone from the back with your palm. It actually started to vibrate after a couple of tabs to my surprise

Anyway, if you find that the vibrate keeps going off again, simply download one of those free vibration apps. For me I used iBrate, and kept running it (hitting it when it stops) until the vibration became constant. I did a few cycles of that (ie starting and stopping the vibration) and it was fine after that!

Sunday, August 31, 2014

5130c 2690 2700 power on vibret and without light nokia logo

Sunday, August 24, 2014

How to Manually Change Time Date on Sony Xperia Z1s

To manually set the date:

1. On your Home screen, tap the

.
2. Select Settings, then tap Date & Time.
3. You need to uncheck the Automatic date & time. If it is set to automatic.
4. Then tap on Set date, and adjust the date by scrolling up and down.
5. To confirm the changes, tap Done.

To manually set the time:

1. On your Home screen, tap the

.
2. Select Settings, then tap Date & Time.
3. You need to uncheck the Automatic date & time. If it is set to automatic.
4. Then tap on Set time, and adjust the time by scrolling up and down.
5. To confirm the changes, tap Done.

If you want to change the timezone:

1. On your Home screen, tap the

.
2. Select Settings, then tap Date & Time.
3. You need to uncheck the Automatic date & time. If it is set to automatic.
4. Then tap on Select time zone.
5. Find your preferred time zone in the option.