Complete Fix Solution

Showing posts with label official. Show all posts

Tuesday, September 23, 2014

Manual Update Galaxy Note N7000 with Official Jellybean 4 1 2 XXLT5 Firmware

XXLT5 for Galaxy Note N7000 ropes in the much awaited stability to the Jellybean 4.1.2 release and can now be updated in your device. So, for all those who are just waiting for updating your device with the most stable firmware ever can now rejoice. Let’s check out on how you can exactly apply this release in your phablets. For all whose who have updated their device with the XXLT4 version of firmware, users reported issues with the Video Player and the same has been fixed in this release.

Note: Applying this update will in no manner be voiding the warranty in any manner as it’s an official update released by Samsung Electronics.

Quick Pre Requisites:

All the data in your Samsung Galaxy Note N7000 should be backed up with the help of below mentioned steps. Make sure that you are not backing the data with the help of KIES as it may not help you restore the data.

SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”

From the path “Settings > Applications > Development > USB debugging”, enable the USB Debugging and also make sure that your device is left with the minimum of 40% or the device will get turned off in the middle of customizing process.

(Optional) Turn off your device so that it can be entered in the Recovery mode. Recovery mode in Galaxy Note N7000 can be entered by pressing the Volume Up Key + Menu Button and then press the Power button. Just in case if the device gets turned ON in the normal mode, then you will have to retry the process of entering the device in the Recovery Mode. If your device is rooted, then you can enter into Recovery Mode via ROM Manager app. In Recovery mode, select “Wipe Data” and “Clear Cache” to wipe all the data.

Disclaimer: Though we don’t like to give any disclaimers, the only thing we would like to tell you is that please follow all the instructions mentioned in this article or else there is a risk of bricking your device for which we should not be held responsible.

Assuming that you are done with all the above mentioned steps, you can now proceed to the next step where we have mentioned the detailed tutorial on how to apply this firmware update in your Galaxy Note N7000.

Procedure to Update Galaxy Note N7000 with Official XXLT5 Jellybean 4.1.2 Firmware:

Download the XXLT5 Jellybean 4.1.2 Firmware Update Package from here to your computer along with the Odin. Once downloaded, extract both the files in your computer and then open Odin in your computer.

Turn Off your device so that it can be entered in the Download mode. Download Mode in Galaxy note N7000 can be entered by pressing the Volume Down Key + Menu Button and then press the Power button. Just in case if the device gets turned ON in the normal mode, then you will have to retry the process of entering the device in the Download Mode.

Connect your phone to the computer with Original USB cable and keep Odin opened in your computer. Once connected, you will see that the ID: COM section will turn yellow indicating that the device drivers have been installed successfully.

Click on “PDA” tab to select the tar file from the extracted firmware file and once you are done with the file selection, click on “Start” to start the process of firmware update process. As soon as the firmware update process is done, you will then have to disconnect the device from computer.

Note: If the device gets stuck in the Samsung logo or gets into the boot loop mode then you need to long press the power button and turn off the device. Repeat the process from the start by following the instructions.

So there you go, you have successfully updated your Galaxy Note with the latest version of Jellybean 4.1.2 firmware which is dubbed as XXLT5. We will very soon come up with the tutorial which will help you to root Galaxy Note n7000 on XXLT5 Firmware.

Sunday, September 21, 2014

Samsung Galaxy Ace 3 LTE S7275R Android 4 2 2 Jelly Bean Official Firmware How to Update Guide

The LTE version of Samsung Galaxy Ace 3 with model number GT-S7275R has received a new Android 4.2.2 Jelly Bean update with firmware build number S7275RXXUANB3. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: S7275RXXUANB3
CSC: S7275ROXXANB1
MODEM: S7275RXXUANB2
Version: Android 4.2.2
Build date: Feb 25, 2014
Regions: Nordic countries
Samsung Galaxy Ace 3 (LTE) S7275R users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Ace 3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.2.2 XXUANB3 Jelly Bean firmware is compatible only with the LTE version of Samsung Galaxy Ace 3 (GT-S7275R). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Ace 3 by navigating to Settings >> About Phone.
Files Required
1. Android 4.2.2 XXUANB3 Jelly Bean Firmware For Galaxy Ace 3 (LTE) S7275R
2. Odin 3.07
Steps to Update Galaxy Ace 3 (LTE) S7275R with Android 4.2.2 XXUANB3 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Ace 3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Ace 3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted S7275RXXUANB3 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy Ace 3 (LTE) S7275R should be now updated with Android 4.2.2 XXUANB3 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.
Note: If Galaxy Ace 3 (LTE) S7275R stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Monday, August 18, 2014

Update Galaxy Mega 5 8 I9152 with Android 4 2 2 XXUAML4 JB Official Firmware How to

Samsung has released the Android 4.2.2 update to the latest Jelly Bean firmware build number for the Galaxy mega I9152XXUAML4 5.8 with Dual SIM card slot (GT-I9152). The new firmware is now officially available as an Over-The-Air (OTA) update via Samsung Kies also.

Firmware details

PDA: I9152XXUAML4
CSC: I9152OXEAML4
MODEM: I9152XXUAML4
Version: Android 4.2.2
Built date: Dec 17, 2013
Regions: Russia, Kazakhstan, Ukraine, Uzbekistan

Samsung Galaxy Mega 5.8 I9152 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites

Install USB Drivers for Samsung Galaxy Mega 5.8 on the computer.
Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
Make a backup of all your important data before following the guide.
The Galaxy Mega 5.8 should be factory unlocked and not locked to any particular carrier.
Ensure the battery of the phone is charged more than 80 percent.
The Android 4.2.2 XXUAML4 Jelly Bean firmware is compatible only with the Samsung Galaxy Mega 5.8 (GT-I9152). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Mega 5.8 by navigating to Settings >> About Phone.

Files Required

1. Android 4.2.2 XXUAML4 Jelly Bean Firmware (Mirror Link 1, Link 2)

2. Odin 3.07

Steps to Update Galaxy Mega 5.8 I9152 with Android 4.2.2 XXUAML4 Jelly Bean Firmware

1. Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).

2. Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.

3. Switch off the Galaxy Mega 5.8.

4. Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.

5. Run Odin on the computer as an Administrator.

6. Connect the Galaxy Mega 5.8 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

7. Select the following files in Odin from extracted I9152XXUAML4 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

8. In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.

9. Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.

10. Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Mega 5.8 I9152 should be now updated with official Android 4.2.2 XXUAML4 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Mega 5.8 I9152 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.