Showing posts with label root. Show all posts
Showing posts with label root. Show all posts

Friday, September 19, 2014

Root Unroot Xolo A700

Are Youll Using Xolo A700 and would like to grant acees to all the Applications and Download Die Hard Battery Script for extending the Xolos Capacity to increase its Battery..?? So you are at a Right Place.. I would show you how to root Xolo A700 in very few Simple Steps..

Heres a quick specification of this phone:

  • 1GHz dual core processor, 512MB Ram - MT6577 chipset
  • 4.5 inch IPS Capactive touch Display - 960 x 540 pixels 16M
  • 5MP Camera
  • 4GB inbuilt storage
  • 3G / Wi-Fi
  • GPS

ROOTIG XOLO A700

Download:
Root_with_Restore_by_Bin4ry_v31: [Improved Root-Method by Ariel Berkman]

Mirror 1 Uploaded.to : Click
Mirror 2: Click

How-To:
1.) Download attached file.
2.) Extract it using 7zip
3.) Double click the RunMe.bat and follow instructions!
[IF you want To Root Your Device.. Press 1]

UNROOTING XOLO A700

Follow the same procedure for Unrooting and Just Press 5 instead of 1 


Read More..
Posted by at No comments:
Labels: , , ,

Thursday, September 18, 2014

How to Root Samsung Galaxy Chat B5330 B L Using Android 4 1 2 Jelly Bean Firmware Guide

Recognised XDA Developers, Chainfire recently released CF-Auto-Root file for variants of Samsung Galaxy Chat bearing model number GT-B5330/B/L.
CF-Auto-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root. In essence, it does nothing but install and enable SuperSU on your system, so apps can gain root access. Head over to the CF-Auto-Root main thread to learn more about the root method.
Samsung Galaxy Chat B5330/B/L users who have already installed their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.
Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-requisites
1. Install USB Driver for Samsung Galaxy Chat on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options (Android 4.0 or later) or go to Settings >> Applications >> Development (Android 2.3 or earlier).
3. Make a backup of all your important data before following the guide.
4. The Galaxy Chat should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The CF-Auto-Root file works only on Samsung Galaxy Chat B5330/B/L. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Chat by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy Chat GT-B5330 (CF-Auto-Root-zanin-zaninxx-gtb5330.zip), GT-B5330B (CF-Auto-Root-zanin-zaninvj-gtb5330b.zip), or GT-B5330L (CF-Auto-Root-zanin-zaninub-gtb5330l.zip)
2. Odin 3.07
Steps to Root Galaxy Chat B5330/B/L Running on Android 4.1.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy Chat. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy Chat to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root with .tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Samsung Galaxy Chat B5330/B/L running on Android 4.1.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.
Read More..
Posted by at No comments:
Labels: , , , , , , , , , , , , , , , , ,

Wednesday, September 17, 2014

How to Root Samsung Galaxy Note 3 Neo 3G SM N750 on Using Android 4 3 Jelly Bean Firmware

How
Samsung Galaxy Note 3 Neo (3G) SM-N750 users who wish to root their devices, may follow the tutorial below.

This tutorial uses CF-Auto-Root file released by Senior Recognized XDA-Developers, Chainfire. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-requisites
1. Install USB Driver for Samsung Galaxy Note 3 Neo on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the 3G version of Galaxy Note 3 Neo (SM-N750). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 3 Neo by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root (CF-Auto-Root-hl3g-hl3gub-smn750.zip)
2. Odin 3.09

Steps to Root Galaxy Note 3 Neo (3G) SM-N750 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.09 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy Note 3 Neo. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Note 3 Neo to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 5: In Odin, click the AP button and select the CF-Auto-Root-hl3g-hl3gub-smn750.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Note 3 Neo (3G) SM-N750 running on Android 4.3 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.

How to Fix "Unfortunately, SuperSU has stopped"?
Step 1: Download and install the latest APK of SuperSU on your device.
Step 2: Open SuperSU app (update the binary if prompted) and allow it to disable KNOX.
Step 3: Reboot your device.
Read More..
Posted by at No comments:
Labels: , , , , , , , , , , , , , , , , ,

Monday, September 15, 2014

How to esay Root Nexus 5 on Android 4 4 1 KOT49E KitKat and Install CWM TWRP Recovery

Google has just released Android 4.4.1 update to version Kitkat KOT49E build for Nexus 5. The new official update is now available as an Over-The-Air (OTA) update. 

Note: You can manually download the OTA for Nexus 5 directly from Google Server Update and follow the step-by-step guide to install the update manually. 

Nexus 5 users who already updated their devices with Android 4.4.1 KOT49E KitKat, can eradicate the equipment they are using the tutorial below. 

Disclaimer: Rooting your device voids the warranty. Our developers and rooting procedure is not responsible if there are undesirable results can occur on your device. use this guide to root solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the phone. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.
3. The Nexus 5 bootloader should be unlocked.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Nexus 5. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 5 by navigating to Settings >> About Phone.

Files Required
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 5 Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your Nexus phone to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 5 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your phone.
Step 6: Switch off the Nexus 5. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.5-hammerhead.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 5 running on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer of the Nexus 5 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.
Read More..
Posted by at No comments:
Labels: , , , , , , , , , , , , , , , ,

Wednesday, September 10, 2014

How to Easily Root Galaxy S3 LTE ON I9305 Android 4 3 Jelly Bean Firmware

How to Easily Root Galaxy S3 (LTE) ON I9305 Android 4.3 Jelly Bean Firmware_LTE version of the Samsung Galaxy S3 at the model number GT-I9305 has gained Jelly Bean Android 4.3 firmware update with build number I9305XXUEMKC. The new official firmware that is currently available as an Over-The-Air (OTA) update or through Samsung Kies.

Samsung Galaxy S3 (LTE) I9305 users who have updated their devices with Android 4.3 Jelly Bean, can root their devices by using the following tutorial.

This tutorial uses the CF-Auto-Root files released by XDA-Developers Senior Recognized, Chainfire. File CF-Auto-Root Galaxy S3, allowing users to root their devices easily without depending on the firmware. It is really support for Android 4.3 Jelly Bean and the upcoming firmware as well. To get to the main thread CF-Auto-Root to learn more about the root method.



Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on the LTE version of the Samsung Galaxy S3 (GT-I9305). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root for Galaxy S3 (LTE) I9305 (CF-Auto-Root-m3-m3zh-gti9305.zip)

Steps to Root Galaxy S3 (LTE) I9305 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-m3-m3zh-gti9305.tar.md5file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S3 (LTE) I9305 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.
Read More..
Posted by at No comments:
Labels: , , , , , , , , , , , , , ,

Root Galaxy Note 2 N7100 on XXDME1 Jellybean 4 1 2 Firmware – Guide

 All those who have updated their Samsung GALAXY Note 2 smartphone with the XXDME1 version of Jellybean 4.1.2 firmware can now be rooted easily with the help of a simple procedure which we will be discussing in the due course of this article. 

Once you have rooted the device, you can then install the apps which need root access and also you can install custom ROM firmwares which we will be coming out very soon. So, before we proceed on to the guide to root the device, you will need to follow the list of pre requisites mentioned below.

Note: Rooting your Galaxy Note 2 N7100 smartphone will void the warranty, to restore back the lost warranty, you need to re-apply the firmware of XXDME1 of whose the link is mentioned below.

Quick Pre Requisites:
  • All the data in your Samsung Galaxy Note II should be backed up with the help of below mentioned steps. It’s recommended to not to use the KIES for taking the backup as it may not help you restore the data.
SMS – Use “SMS Backup & Restore app”,Contacts – Sync with the Gmail application,Call Log -Call Log and RestoreImages, Songs, Videos, Files – Copy to internal / External SD Card,APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”
  • Enable the USB Debugging from the path “Settings > Applications > Development > USB debugging” and also you will have to ensure that the minimum battery life should be 40% so as to ensure that the phone doesn’t get turned Off in the middle of update.
Disclaimer: We should not be held responsible or liable in any manner for any damage caused due to not following instructions.

Once you are done with following all the above mentioned instructions, you can now proceed to the next step where we have mentioned a detailed tutorial on how to update your Galaxy Note 2 N7100 with the Jellybean 4.1.2 firmware. 

Procedure to Update Galaxy Note II with Jellybean 4.1.2 XXDME1 Firmware:
  • Now, turn Off your Phone so that it can be entered in the Download Mode. The Download Mode can be entered by first turning Off the device and then Hold Volume Down + Menu Button and while holding both Keys to Power ON the device till you see the Green Robot on the Lcd which is nothing but the Download Mode.
  • In Download Mode, connect your phone to computer with original USB cable to see ID: COM section turn Yellow / Blue which indicated that all the drivers are installed successfully.
  • Click on “PDA” to select the rooting file which you got after extracting the rooting package in initial step. Now, click on “Start” to start the process of firmware update. Once the process is done, the phone will be rebooted. Please note that the process of rooting will take around 2 – 4 minutes of time.
  • Once you see the home Lcd in your phone, all you need to do is to just disconnect the device and check whether the firmware is updated successfully or not.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome Lcd, just long press the Power button and re follow the above instructions so as to again follow the above mentioned instructions.
So there you go, you have successfully rooted your Galaxy Note 2 with Official Jellybean 4.1.2 firmware of XXDME1. Do share with us in the comments section just in case if you face any issues in the process of firmware update.

Read More..
Posted by at No comments:
Labels: , , , , , , , , , , , ,

Friday, September 5, 2014

How to Root Samsung Galaxy S Duos 2 S7582 on Android 4 2 2 Jelly Bean and Install CWM Recovery GuideS7582

Samsung Galaxy S Duos 2 S7582 users who wish to root and install ClockworkMod Recovery (CWM) on their devices, may follow our step-by-step guide.
This tutorial uses CWM recovery released by XDA-Developers member, ahmedhameed. The CWM recovery allows Galaxy S Duos 2 users to root their devices without any difficulty.
Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-Requisites
1. Install USB Drivers for Samsung Galaxy S Duos 2 on your computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S Duos 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CWM recovery works only on the Galaxy S Duos 2 (GT-S7582). Applying this on any incorrect variant might brick the device. Verify the model number of the Galaxy S Duos 2 by selecting Settings >> About Phone.
Files Required
1. CWM (Mirror Link) (recovery.tar.md5)
2. SuperSU (UPDATE-SuperSU-v1.34.zip) or the latest version
3. Odin 3.07
Steps to Install CWM Recovery on Galaxy S Duos 2 S7582
Step 1: Extract the Odin 3.07 file using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Copy the SuperSU .zip file to the SD card of your phone.
Step 3: Switch off the Galaxy S Duos 2. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy S Duos 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 6: In Odin, click the PDA button and select the recovery.tar.md5 file. Make sure that the F. Reset Time, Auto Reboot and Re-Partition checkboxes are NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Steps to Root Galaxy S Duos 2 S7582 via CWM Recovery
Step 9: Boot the device into CWM recovery by pressing and holding Volume Up, Home and Power buttons together.
Step 10: In CWM recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once the installation process completes, return to main recovery menu and select "reboot system now".
Samsung Galaxy S Duos 2 S7582 running on Android 4.2.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.
Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.
Screenshot: Install CWM recovery via Odin
Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread. 
Read also: How to Update Galaxy S Duos 2 S7582 with Android 4.2.2 DDUANC1
Jelly Bean Official Firmware
Read More..
Posted by at No comments:
Labels: , , , , , , , , , , , , , , , , , ,

Friday, August 8, 2014

How Easy Root Galaxy Note 2 T Mobile SGH T889 on Android 4 3 Jelly Bean Firmware

How to Root Galaxy Note 2 (T-Mobile) SGH-T889 on Android 4.3 Jelly Bean Firmware-T-Mobile version of the Samsung Galaxy Note 2 with the model number SGH-T889 just got an update to Android 4.3 Jelly Bean firmware build number T889UVUCMK7. The new official firmware is now available as an Over-The-Air (OTA) update via Samsung Kies as well. 


Samsung Galaxy Note 2 (T-Mobile) SGH-T889 users who have updated their devices with Android 4.3 Jelly Bean, the device can eradicate them by using the tutorial below. 

This tutorial uses the CF-Auto-Root files released by XDA-Developers Senior Recognized, Chainfire. File CF-Auto-Root Galaxy Note 2 which allows the user to root their devices easily without depending on the firmware. It was really supports Android 4.3 Jelly Bean and firmware in the future as well. Head to the main thread CF-Auto-Root to learn more about the root method.


Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!



Pre-requisites

1. Install USB Driver for Samsung Galaxy Note 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the T-Mobile version of the Samsung Galaxy Note 2 (SGH-T889). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 2 by navigating to Settings >> About Phone.


Files Required

1. CF-Auto-Root for for Galaxy Note 2 (T-Mobile) SGH-T889 (CF-Auto-Root-t0ltetmo-t0ltetmo-sght889.zip)

Steps to Root Galaxy Note 2 (T-Mobile) SGH-T889 Running on Android 4.3 Jelly Bean Firmware

Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy Note 2. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Note 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.



Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.


Step 5: In Odin, click the PDA button and select the CF-Auto-Root-t0ltetmo-t0ltetmo-sght889.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Note 2 (T-Mobile) SGH-T889 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.
Read More..
Posted by at No comments:
Labels: , , , , , , , , , , , , , , , ,
Subscribe to: Posts (Atom)